AIM GmbHAircraft Network & Data Bus TestingRFQ only
AIM ANET-MxAy MIL-STD-1553 / ARINC 429 Ethernet Test Module
The AIM ANET-MxAy is a standalone Ethernet-connected test and simulation module that combines one or two MIL-STD-1553A/B streams with 4, 8 or 12 ARINC 429 channels in a single device [1]. Avionics shops and integration labs use it to simulate bus controllers and remote terminals, monitor traffic and stimulate ARINC 429 equipment from a PC. Novatelia supplies it by RFQ in Oman and on qualified GCC projects.
| Manufacturer | AIM GmbH |
|---|---|
| Model | ANET-MxAy |
| Manufacturer part number | Not published here — confirmed at quotation |
| Product family | ANET Ethernet modules |
| Primary category | Aircraft Network & Data Bus Testing |
| Secondary categories | |
| Technology | Avionics databus test and simulation |
| Aircraft systems | Avionics databuses, LRUs |
| Maintenance type | Shop / bench test |
| Customer types | Avionics shop, Integration lab, MRO |
| Region | Oman; selected GCC projects |
| Commercial status | Request a quote (no public price) |
Primary applications
- MIL-STD-1553 simulation
- ARINC 429 Tx/Rx
- Bus monitoring
Key capabilities
- 1553 section acts concurrently as BC, 31 RTs and chronological/mailbox monitor [1]
- ARINC 429 channels software-programmable for Rx or Tx [1]
- Full error injection and detection on both protocols [1]
- 8 general-purpose discrete I/O signals [1]
Technical specifications
Values below are copied from the manufacturer documentation cited; confirm against the current OEM data sheet before ordering.
| Parameter | Value | Source |
|---|---|---|
| MIL-STD-1553 streams | 1 (M1) or 2 (M2) | [1] |
| ARINC 429 channels | 4, 8 or 12, programmable Rx/Tx | [1] |
| Host interface | 10/100/1000 Mbit/s Ethernet (IEEE 802.3) | [1] |
| Processors | 2 dedicated RISC (1553 BIU, ARINC 429 BIU) + 1 application support processor | [1] |
| Memory | 1 GB DDR3 (ASP & ARINC 429 global RAM), 16 MB SRAM (1553 global RAM), 512 MB flash | [1] |
| Time tagging | 46-bit IRIG-B, 1 µs resolution | [1] |
| Trigger I/O | 1 in / 1 out per bus section, TTL | [1] |
| Discrete I/O | 8 bi-directional | [1] |
| 1553 coupling | Transformer (default) or direct | [1] |
Calibration requirements
Follow AIM's documentation for verification and service; databus interfaces are not routinely calibrated like RF instruments.
Documentation and manufacturer resources
Related guide
Related products
Alta Data TechnologiesARINC 429 Test EquipmentRFQ
Alta Data PCIE4L-A429 ARINC 429 PCIe Interface
Model: PCIE4L-A429
- 4–30 ARINC channels
- Up to 16 shared Rx/Tx and 14 Rx channels
- Standard half-size PCIe, 4-lane
- Part of a family also available in PCI, PMC and XMC
Status: Request a quote · calibration certificate on request
VIAVI SolutionsAvionics Test EquipmentRFQ
VIAVI AVX-10K Flight Line Test Set
Model: AVX-10K
- Transponder Auto tests incl. FAR Part 43
- ADS-B Auto tests per AC 20-165 and CS-ACNS
- Up to five static 1090 MHz ADS-B/ADS-R/TIS-B targets
- TCAS I/II, TAS, E-TCAS intruder scenarios
Status: Request a quote · calibration certificate on request
Browse all aviation products.
Related categories and applications
Availability in Oman / GCC
Available by RFQ. Novatelia supplies and sources selected solutions from this manufacturer subject to availability, OEM channel requirements and project qualification. Lead time, export licensing and accessories are confirmed in the quotation. See Oman aviation supply.
Request a quote
Send part numbers, quantities, delivery location and any calibration or documentation requirements for AIM ANET-MxAy MIL-STD-1553 / ARINC 429 Ethernet Test Module. Quotes depend on manufacturer channel rules, export conditions and availability.
Add to RFQ – contact Novatelia or email [email protected]