DMC – Daniels Manufacturing CorporationAircraft Wiring & Connector ToolsRFQ only
DMC AFM8 Miniature 8-Indent Crimp Tool (M22520/2-01)
The DMC AFM8 is a miniature, ratcheting 8-indent crimp tool qualified to AS22520/2 for the miniature and sub-miniature connector contacts used in electronic systems, on 20 to 32 AWG wire [1]. A removable positioner adapts the frame to a specific contact. Novatelia quotes the AFM8 and its positioners by RFQ for wiring shops in Oman and on GCC projects.
| Manufacturer | DMC – Daniels Manufacturing Corporation |
|---|---|
| Model | AFM8 |
| Manufacturer part number | Not published here — confirmed at quotation |
| Product family | AF8 / AFM8 indent crimp tools |
| Primary category | Aircraft Wiring & Connector Tools |
| Secondary categories | |
| Technology | Mil-spec indent crimping |
| Aircraft systems | Wiring harnesses, Connectors |
| Maintenance type | Shop and line maintenance |
| Customer types | MRO, Avionics shop, Airline |
| Region | Oman; selected GCC projects |
| Commercial status | Request a quote (no public price) |
Primary applications
- Miniature and sub-miniature contact crimping
- Avionics connector repair
Key capabilities
- Mil-standard 8-impression crimp [1]
- Cycle-controlled precision ratchet [1]
- Built-in 8-step selector knob [1]
- Interchangeable positioners with data plate showing contacts and selector position [1]
Technical specifications
Values below are copied from the manufacturer documentation cited; confirm against the current OEM data sheet before ordering.
| Parameter | Value | Source |
|---|---|---|
| Qualification | AS22520/2 | [1] |
| Military part number | M22520/2-01 | [2] |
| Wire range | 20 to 32 AWG | [1] |
| Length | 6 3/4 in | [1] |
| Weight | approx. 10 oz | [1] |
| Gauge check | Selector #8 with M22520/3-1 Go/No-Go gauge (DMC G125) | [1] |
Calibration requirements
DMC recommends periodic gauging with the M22520/3-1 Go/No-Go gauge (DMC G125) on selector setting 8 [1].
Documentation and manufacturer resources
- DMC AFM8 adjustable miniature 8-indent crimp tool – product page
- DMC – AS22520 to DMC cross reference (PDF)
- DMC – Tools for Aerospace catalog (PDF)
Related guide
Aircraft crimp tool selection guide
Related products
DMC – Daniels Manufacturing CorporationAircraft Wiring & Connector ToolsRFQ
DMC AF8 8-Indent Crimp Tool (M22520/1-01)
Model: AF8
- 8-impression crimp for maximum tensile strength on closed-barrel contacts
- Ratchet controls the cycle in both handle directions
- 8-position selector knob, lockable with pin or safety wire
- Over a thousand turret heads available
Status: Request a quote · calibration certificate on request
LaversabPitot-Static & Air Data Test EquipmentRFQ
Laversab Model 6300 RVSM Pitot-Static Tester
Model: 6300
- Automatic ramping to altitude/airspeed set-points, stable within ±1 ft and ±0.1 kt
- 15 stored profiles × 50 set-points
- Independent or simultaneous pitot/static leak checks with three timers
- Programmable limits and negative-airspeed protection
Status: Request a quote · calibration certificate on request
Browse all aviation products.
Related categories and applications
Availability in Oman / GCC
Available by RFQ. Novatelia supplies and sources selected solutions from this manufacturer subject to availability, OEM channel requirements and project qualification. Lead time, export licensing and accessories are confirmed in the quotation. See Oman aviation supply.
Request a quote
Send part numbers, quantities, delivery location and any calibration or documentation requirements for DMC AFM8 Miniature 8-Indent Crimp Tool (M22520/2-01). Quotes depend on manufacturer channel rules, export conditions and availability.
Add to RFQ – contact Novatelia or email [email protected]