Aviation MRO Equipment Checklist

This checklist lists equipment groups an MRO or line station typically specifies, each linked to its category and cited source. It is a planning aid, not a regulatory list; your approved scope and manuals decide what is required.

Avionics

• Ramp test set for transponder/ADS-B/NAV/COM ^[1].
• Pitot-static test set ^[2].
• ARINC 429 / 1553 bench interfaces ^[3].

Inspection and NDT

• Video borescope for engines ^[4].
• Eddy current flaw detector ^[5].

Tooling and control

• Crimp tools for wiring repairs ^[6].
• Torque tools with calibration ^[7].
• Tool-control system ^[8].

Ground support

• Tripod jacks ^[9].
• Hydraulic power unit ^[10].
• Weighing system ^[11].

Quality

• Calibrated test equipment as required by 14 CFR 145.109 for repair stations ^[12].

Products referenced in this guide

• TronairAircraft Jacks & Lifting EquipmentRFQ

  

  Tronair 30 Ton Tripod Jack (CE) 02A7913C0100

  Model: 02A7913C0100

  • Hand pump with built-in pressure relief valve; air pump fitted
  • Threaded rams with hand-wheel safety nut
  • Quick-rising centre extension

  Status: Request a quote · calibration certificate on request

• VIAVI SolutionsAvionics Test EquipmentRFQ

  

  VIAVI AVX-10K Flight Line Test Set

  Model: AVX-10K

  • Transponder Auto tests incl. FAR Part 43
  • ADS-B Auto tests per AC 20-165 and CS-ACNS
  • Up to five static 1090 MHz ADS-B/ADS-R/TIS-B targets
  • TCAS I/II, TAS, E-TCAS intruder scenarios

  Status: Request a quote · calibration certificate on request

Related category

Ground Support Equipment · All aviation guides

Frequently asked questions

Is this list mandatory?

No; your authority approval and maintenance manuals define the required equipment.

Can Novatelia quote a full list?

Yes, by RFQ subject to OEM channel requirements and availability.

This guide is general information. It does not replace the aircraft maintenance manual, the operator's approved procedures or the rules of the competent civil aviation authority.

Request a quote

Send part numbers, quantities, delivery location and any calibration or documentation requirements for aviation mro equipment checklist. Quotes depend on manufacturer channel rules, export conditions and availability.

Add to RFQ – contact Novatelia or email [email protected]

Sources

1. VIAVI AVX-10K Commercial Flight Line Test Set selection guide (PDF)
2. Laversab Model 6300 RVSM pitot-static tester – product page
3. AIM – ARINC 429 bus interfaces
4. Waygate Technologies – Borescopes for aviation
5. Evident NORTEC 700 eddy current array flaw detector – product page
6. DMC (Daniels Manufacturing Corporation) – Mil-spec crimp tools
7. Norbar – Aerospace industry sector
8. Snap-on Industrial – Automated Tool Control (Level 5)
9. Tronair 30 ton tripod jack (CE) 02A7913C0100 – product page
10. Tronair hydraulic power unit 59 Series (60 Hz) 5953 – product page
11. Intercomp – Aircraft platform scales
12. 14 CFR 145.109 – Equipment, materials and data requirements (eCFR)