Infrastructure
RAID 1 mirrors drives, RAID 5 survives one drive failure, RAID 6 survives two, and RAID 10 combines mirroring and striping. Usable capacity, performance and rebuild time differ. RAID protects against drive failure, not against deletion or ransomware, so a separate backup is still needed.
Revised 2026-10-10. Published by Novatelia. No individual author is named, because no personal credential is claimed for this explanation.
Key points
- RAID is availability, not backup.
- Larger drives mean longer rebuilds.
- Use drives of the same type and size in a group.
Definition
RAID combines several drives into one logical volume for redundancy, performance or both. It is set up in a hardware controller, in the operating system, or in a storage system.
How it works
Usable capacity: RAID 1 = half of the raw capacity; RAID 5 = total minus one drive; RAID 6 = total minus two drives; RAID 10 = half. Example with eight 4 TB drives: RAID 5 gives 28 TB, RAID 6 24 TB, RAID 10 16 TB. Choose based on how many failures you must survive and the workload.
Architecture
- Drives in a server or storage enclosure.
- RAID controller or software RAID.
- Separate backup copy, ideally off the same system.
Use cases
- A file server with large drives.
- A database server that needs write performance.
- A small NAS for a branch office.
Comparison
- RAID 6
- Survives two drive failures; common with large capacity drives.
- RAID 10
- Good write performance; uses half the raw capacity.
Selection guidance
- Check the controller or NAS supports the level.
- Keep a hot spare where downtime matters.
- Plan a backup separate from the RAID.
- Monitor drive health and replace failed drives promptly.
Questions
Is RAID a backup?
No. RAID keeps data available when a drive fails. It does not protect against deletion, corruption or ransomware; a separate backup does.
Why choose RAID 6 over RAID 5?
RAID 6 survives a second drive failure, which matters during the long rebuilds of large drives.
Related
More in Infrastructure
This page defines a term so a project can be scoped. It is not a certification, a test result, or a price. Partnerships are stated only on the partners page. The published address and telephone are the company contact, not a service-level commitment.
Describe the requirement
An RFQ saves a browser draft. It does not publish a price or issue a quotation reference.

