Skip to content

How to size a UPS

Infrastructure

Add up the real power (watts) of the equipment, add headroom, and pick a UPS whose watt rating covers it. Then choose runtime: how long the load must run on battery. Watts equal VA multiplied by the power factor, so check both ratings in the datasheet.

Revised 2026-10-10. Published by Novatelia. No individual author is named, because no personal credential is claimed for this explanation.

Key points

  • Size on watts, and check VA as well.
  • Runtime depends on load and battery capacity.
  • Topology affects how clean the output power is.

Definition

A UPS keeps equipment running on battery when mains power fails and conditions the power while mains is present. Common topologies are standby, line-interactive and online double-conversion.

How it works

List each device and its power draw in watts from the datasheet or measured values. Add them and keep headroom; many designs keep the UPS at about 70?80% of its rated load as a planning assumption. Use the manufacturer runtime chart for the chosen load to pick battery modules. Check input and output connections and whether the UPS needs network management.

Architecture

  1. UPS with internal or external batteries.
  2. Power distribution to the rack (PDUs).
  3. Network management card for shutdown and alerts.

Use cases

  • A network closet with switches and a firewall.
  • A server rack that must shut down cleanly.
  • A site with frequent short power interruptions.

Comparison

Line-interactive
Regulates voltage and switches to battery on failure; common for closets.
Online double-conversion
Feeds the load continuously from the inverter; common for servers and sensitive loads.

Selection guidance

  • Use measured or datasheet watts, not nameplate maximum only.
  • Size runtime for a clean shutdown or for generator start.
  • Check battery replacement access and lifetime.
  • Plan the PDU and outlet types.

Questions

What is the difference between VA and watts?

VA is apparent power and watts are real power. Watts = VA ? power factor. A UPS has a limit for both, so the load must stay within each.

How long will a UPS run?

It depends on the load and the batteries. Use the manufacturer runtime chart; runtime falls as the load rises.

Related

More in Infrastructure

This page defines a term so a project can be scoped. It is not a certification, a test result, or a price. Partnerships are stated only on the partners page. The published address and telephone are the company contact, not a service-level commitment.

Describe the requirement

An RFQ saves a browser draft. It does not publish a price or issue a quotation reference.