Skip to content

How to choose an enterprise network switch

Infrastructure

Start from the number of devices and their connection speed, then add uplinks, PoE power and growth. Decide whether the switch only forwards traffic inside a network (layer 2) or also routes between networks (layer 3). Model names come last, after these numbers are written down.

Revised 2026-10-10. Published by Novatelia. No individual author is named, because no personal credential is claimed for this explanation.

Key points

  • Count access ports by speed: 1G, 2.5G/mGig, 10G.
  • Size uplinks so traffic from all access ports can leave the switch.
  • Add the PoE budget only for the devices the switch must power.

Definition

A network switch connects devices inside a local network and forwards Ethernet frames between its ports. Managed switches add VLANs, monitoring and access control. Layer 3 switches can also route between VLANs.

How it works

Write a port list per closet or rack: how many ports, what speed, which ones need PoE. Choose uplink ports (for example 10G SFP+ or 25G SFP28) that match the fiber and the switch above. Then check the features the design needs, such as VLANs, link aggregation, stacking or routing protocols, and confirm them in the manufacturer datasheet.

Architecture

  1. Access layer: user ports, phones, access points and cameras, often with PoE.
  2. Distribution or core: fewer, faster ports that aggregate the access switches.
  3. Data center: top-of-rack switches with 10/25/100G ports for servers and storage.

Use cases

  • An office floor needs 48 user ports and 8 PoE ports for access points.
  • A server rack needs 25G ports for hosts and 100G uplinks.
  • A branch needs one switch that also routes between a few VLANs.

Comparison

Layer 2 switch
Forwards traffic inside VLANs; routing happens on another device.
Layer 3 switch
Also routes between VLANs; check which routing features the license includes.

Selection guidance

  • Leave 20?30% spare ports for growth, as a planning assumption you can adjust.
  • Check the PoE budget of the whole switch, not only the per-port maximum.
  • Confirm the transceivers and cables for every uplink before ordering.
  • Ask whether the model needs a license for the features you plan to use.

Questions

Do I need a layer 3 switch?

Only if the switch must route between VLANs or networks. If a firewall or router already does that, a managed layer 2 switch is often enough.

What is stacking?

Stacking joins several switches so they are managed as one unit. Whether it is available, and which cables or modules it needs, depends on the model.

Related

More in Infrastructure

This page defines a term so a project can be scoped. It is not a certification, a test result, or a price. Partnerships are stated only on the partners page. The published address and telephone are the company contact, not a service-level commitment.

Describe the requirement

An RFQ saves a browser draft. It does not publish a price or issue a quotation reference.